- #MEDIATEK SMART TOOL INSTALL#
- #MEDIATEK SMART TOOL PC#
Although, you will need some patience and a bit of knowledge to fix bricked smartphones by yourself. So as you can see, this is a very lengthy process to unbrick your Mediatek powered Realme smartphone using SP flash tool. Once the process is complete, you will see a Green Circle with a tick mark saying Download Ok. Wait for the process to complete as it will take some time.
Finally, click on Download and it should start downloading the Firmware into your Mediatek Smartphone. 
Click on choose next to the Scatter-loading file and select the “Android Scatter.txt” file from the ROM folder that you have downloaded. Click on choose next to the Download-Agent option and select the “DA_6765_6785_6768_6873_6885_6853.bin” file from the Verified Boot Fix folder within the Bypass tools folder. Now connect your phone by turning it off and pressing the Volume Down and Volume Up buttons together. Click on Options and under General you will find a Check LIB DA match option. Run the Flash_tool.exe from the SP Flash tools folder. This is the last step and quite an easy one if you have finished all of the hard steps that are mentioned above. Step 5: Flash the Stock ROM using the SP flash tool Additionally, you can refer to this thread in XDA. If you are facing any issues and need help, here is also a very extensive guide on the DAA SLA protection by the ROM provider website. Wait for it to complete and you should be able to see the “Protection Disabled” result.Ĭlose it and you are now ready to flash your phone with the SP flash tool. Connect your phone as you connected before by turning it off and pressing the vol+ and vol- buttons. 
Just go to the folder where you have extracted the bypass tool package. If you have done all these correctly, then you can disable protection on your phone.
Once it is done, open the Command prompt and type in the following command: python -m pip install pyusb pyserial json5
You will see your device listed as Mediatek preloader, select it and click on install. While installing the Lib USB package, turn off your device and connect your phone to the PC by pressing and holding Vol up and Vol Down. Make sure that you have checked the “Add python to the PATH” option while installing. Then, download and install Python from here. 
First, Download the Bypass package from here.
0 kommentar(er)
